Got all the bits and pieces together for my new Recurve...
...Bit different to Longbow and compound, was quite surprised at the amount of setting up necessary, but am quite enjoying messing around with the new project.
The bow consists of a 25" left hand KAP Winstar II riser, 70" 42 lb Carbon KAP Winstorm limbs, Shibuya DX plunger, ARE non-adjustable magnetic rest, Bernadini TFC coupling and Doinker 6ET 6" stabilizer.
I've got it all together, roughly set-up, will need to be properly tuned, but am quite happy with it so far, been shooting a little on the bales in the backyard.
Am using Carbon Express 3D select arrows, the bow is just under the 50lb mark at my drawlength (adjusted the limbs slightly to get it to weight). Will chrono it when the weather permits over the weekend.
About the only thing I'd like to change at present is a little bit more weight on the stabilizer, I think Doinker makes extra weights so shouldnt be an issue.
I am pretty excited about shooting in this class, these bows seem quite accurate!